PRi EPOXY REMOVER

All the types of tile on which epoxy grout has been filled and the spillage ofthe grout residue remains after the curing.

• Solvent based formula
• Designed for quick and effective removal of the grout residue of epoxy over tiles.

1.  Always work in small area, i.e. Less than 0.5 M .
2. Apply generously to the area required. Leave to work for approximately 4-5 minutes.
3. Once epoxy grout has softened, carefully remove with a suitable tool, i.e. a palette knife.
4. Repeat process if necessary to remove all deposits.
5. Wash down the area immediately afterwards with detergent and cold water.
6. Always dispose of any waste thoroughly

• Dangerous to contact with eye, skin & human body.
• It’s Damages the alkaline stone & marble. So Please Check before applying.
• Always ensure good ventilation, i.e. open windows and doors.
• Always store in a cool place to opening.
• Protect surrounding areas from damage, i.e. paint work, plastics and textiles.
• Turn off appliances, i.e. gas and electric fires, etc.
• Wear suitable protective clothing

In case material is released or spilled, clean up most of the product. Store the residue in plastic tanks neutralizes with a solution of hydrochloric acid adjusting the pH to 6-7 then send to water conditioner orcall for a specialized company personal.