PRi STONEFIX PRIMER
PRiBOND’S PRi Stonefix Primer is an aqueous dispersion of an acrylate copolymer and styrene. It does not contain APEO and formaldehyde.
Polymer Dispersions for Construction
Properties
Physical form – Liquid dispersion
Solid content | 48 – 50 % | |
pH Value | 6.0 – 8.0 | |
Viscosity | Brookfield 23 °C, spindle 2, 20 rpm | 200 – 1,500 mPa·s |
Density | 20 °C | Approx. 1.04 g/cm |
- Application areas PRi Stonefix Primer is used to manufacture building adhesives and primers with improved water resistance and good adhesion to mineral and glazed surface, such as back tile adhesives.
- Back tile adhesives with PRi Stonefix Primer retains excellent adhesion to porcelain tile seven after long term water treatment. The high resistance against water and alkaline enable a more durable solution for the customer. Additionally, the rollable application of back tile adhesives enables a quick and reliable application on the job site.
- Trials must be performed in advance since the performance of PRi Stonefix Primer can be influenced by other additives and materials involved.
- PRi Stonefix Primercan readily be used as adhesives directly applied to the back of the tile at the construction site.
- Although PRi Stonefix Primer is protected against microbial attack, preservatives must still be added to the finished products to ensure consistent quality even after a long storage time.
- It is strongly recommended to carry out your own trials when developing and processing products contains PRi Stonefix Primer. This also includes testing the storage stability of customer’s finish product.
When handling this product, please comply with the advice and information given in the safety data sheet and observe protective and workplace hygiene measures adequate for handling chemicals
The data contained in this publication are based on our current knowledge and experience. They do not constitute the agreed contractual quality of the product and, in view of the many factors that may affect processing and application of our products, do not relieve processors from carrying out their own investigations and tests. The agreed contractual quality of the product at the time of transfer of risk is based solely on the data in the specification data sheet. Any descriptions, drawings, photographs, data, proportions, weights, etc. given in this publication may change without prior information. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed.